DTron2 45/90

7” submersible electronic multi-impellers pump for clean water designed for use in wells and tanks.
It can be used submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for use in domestic and residential environments for pressurization, rainwater reuse, gardening and irrigation activities.
The expansion vessel is integrated, no external expansion vessel is required.
The electronic operation allows the pump to start and stop autonomously by the system requirements and protects against the dry run
Capacitor and integrated anti-overheating motor for thermal protection.
Quick coupling/release anti-tear off cable to facilitate installation inside tanks.
Asynchronous submersible water cooling motor. The hydraulic side of the motor shaft is in AISI 303 stainless steel. Double mechanical seal in oil chamber ensure the pump is watertight.

DAB Dtron2 Submersible Pump

CA$1,205.00

Quantity

Flow rate maximum: 7,5 m3 /h Head up to: 45 m Maximum immersion depth: 7/12 m Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral Free passage: 2 mm Minimum suction depth: 110 mm Minimum level of water: 35 mm Liquid temperature range: from +0°C to +50°C Minimum and maximum ambient temperature: <0°C / +50°C Maximum immersion depth: 15 m Set cut-in: 2,4 bar (±0,2) Flanges, thread: Thread 1” 1/4 Pump maximum diameter: 185 mm Impeller/s material: Technopolymer/ AISI 304 stainless steel Maximum number of starts: 60/h Non-stop service: yes Protection class: IP 68 Motor insulation class: F Power cable (m) and plug: 10/15 m with plug Single phase power input: 230 V 50 Hz Possible type of installation: Fixed, horizontal or vertical. Submerged or semi-submerged. It can be installed on the surface, under the water level, or outside in a vertical position with the DOC68 accessory (supplied separately). Special versions on request: X version with suction kit for suction at a higher level. Version for drinking water certified WRAS, ACS, NSF 61 and 372. Surface version (the DOC68 accessory is required) Certification: WRAS, ACS, NSF 61 and 372 (only model for dirking water)

TECHNICAL DATA